Description
14" Balance Bike Electric Hub Motor Kit — Strider & Push Bikes
- Motor: 250W electric hub motor
- Controller: 24V, 12A
- Top speed: Up to 13 mph, 3rd speed, 100% power
Real, Confirmed Speed
Up to 13 MPH, Not a Guess
Third speed at full power tops out around 13 mph, per the supplier’s own listing. Slower settings run closer to an adult’s brisk walk, giving a real range between first ride and full confidence rather than an all-or-nothing throttle.
Parent-Controlled Power
A 50% Power Mode Built In
A dedicated 50% power mode caps output for a newer rider without needing a separate speed-limiter part, alongside an optional kick-start mode that eases beginners into throttle use rather than launching from a dead stop.
Everything Pre-Assembled
A Rear Wheel That’s Already Built
The rear wheel ships with the hub motor pre-installed rather than as loose parts to assemble, cutting install time down to bolting the wheel in and connecting the pre-wired harness.
Specifications
| Motor | 250W electric hub motor |
|---|---|
| Controller | 24V, 12A |
| Top speed | Up to 13 mph in 3rd speed at 100% power |
| Frame fit | 100–135mm rear forks (125mm specifically named) |
| Brakes | Disc brakes, dual |
| Power modes | Kick start option, 50% power parent-limit mode |
Installation Notes
- Pre-built rear wheel with hub motor, ready to bolt on
- Handlebar, stem and bar clamp, ready for easy integration
- Compact throttle sized for small hands
- 24V, 12A controller pre-wired to the motor and throttle
Description
This kit turns a 14-inch push bike, Strider or otherwise, into a powered ride: a pre-built rear wheel with the hub motor already installed, a handlebar/stem/bar clamp assembly, and a compact throttle sized for small hands.
Fitment note: the product title specifies 125mm rear forks, but the same listing’s fitment section states a broader 100–135mm range. We’re carrying both figures rather than picking one, measure your bike’s rear fork spacing if you’re not certain.
Safety features go beyond a single speed switch: dual disc brakes handle stopping power, an optional kick-start mode lets a rider push off before the motor engages rather than launching from a dead stop, and the 50% power mode gives a parent a hard ceiling independent of which speed setting is selected.
14" kit vs. the 12" kit — same motor platform, different frame fit
| 14" Kit (this page) | 12" Kit | |
|---|---|---|
| Motor | 250W hub motor | 250W hub motor |
| Battery | 24V | 21V (2.6–4Ah) |
| Frame fit | 100–135mm rear forks | 85–100mm dropouts (Sport/Pro) |
| Top speed | Up to 13 mph (3rd speed) | Not stated |
| Brakes | Dual disc brakes | Not specified in listing |
| Price | $249.97 | $269.97 |
FAQ
- What’s the actual top speed?
- Up to 13 mph in 3rd speed at 100% power, per the supplier’s own listing.
- Is there a way to limit speed for a beginner?
- Yes, a built-in 50% power mode caps output without needing a separate part.
- What is kick start mode?
- An optional mode where the bike must be pushed or kicked into motion before the motor engages, rather than the motor starting from a dead stop.
- Does the throttle require special hand strength?
- No, it’s described as compact and sized for small hands specifically.
Reviews
There are no reviews yet.